Mitsubishi MJ-E16S-S1 Service Manual page 34

6. Removing the drain pan assembly
Steps 1) Following the sequence in Procedures
1-3 above, remove the water tank,
front panel, front case assembly, rear
panel and blower fan assembly.
2) Release the drain pan and base
fittings, lift up the right side of the heat
exchanger while removing the base.
Repairable
parts
<Compressor wiring diagram>
Gray (R)
34
(See Picture 20 and 21)
Compressor
Red (S)
White
Gray
White(C)
Picture 20
Drain pan and base fittings
Picture 21
Heat
exchanger
Base