Canon zr10. Instruction Manual page 83

4_ZR10_E(73-85) 3/9/00 7:59 PM
6. When you get to the point where you want to stop dubbing, press
the STOP button (and then stop play on the other audio device if
AUDIO IN).
• Audio dubbing stops and AUDIO DUB. disappears from the display.
• The camera returns to stop mode.
• You can also set zero set memory (
audio dubbing, then every time you return to that position, audio dubbing
will cancel.
• If instead of pressing STOP you press PAUSE, the camera will return to the
playback pause mode.
• You can not use the DV terminal while adding sound.
• You might want to adjust the audio mix (
added sound.
• There may be a loss of sound quality if you add sound to a tape recorded on a
camcorder other than the ZR10.
• After adding sound three or more times to the same place on a tape, there may
be some loss in sound quality.
Page 83 (1,1)
72) at the place you want to stop
84) when playing back a tape with
E
83