Canon zr10. Instruction Manual page 82

4_ZR10_E(73-85) 3/9/00 7:58 PM
Preparations
E
Turn the camera's POWER switch to VCR and load a recorded cassette.
• Make sure the REC/SAVE tab on the cassette has been slid to REC (closed
position).
Dubbing
Use the wireless controller when dubbing audio.
Do not connect/disconnect any cables to/from the camera when dubbing audio or
preparing to dub audio.
(
1. Open the VCR menu, select AUDIO DUB.
2. Select AUDIO IN or MIC. IN and close the menu.
3. Locate the point where you want to start audio dubbing, then press
the PAUSE button.
• You can use the playback buttons on the body of the camera or the special
playback functions on the wireless controller in the same way as in playback
mode.
• The camera becomes set to playback pause mode.
4. Press AUDIO DUB.
• AUDIO DUB. and
5. Press the PAUSE button (and start play on the other audio device
if AUDIO IN).
• Audio dubbing starts.
• If MIC. IN, direct your voice into the microphone.
•
82
Page 82 (1,1)
AUDIO DUB.••AUDIO IN
36)
appear on the display.
changes to .
REC
SEARCH
PAUSE
SELECT
ZERO SET
REW PLAY FF
MEMORY
AUDIO
– / STOP
+ /
DUB.
A/V
PAUSE SLOW 2
INSERT