Basic Recording - Canon zr10. Instruction Manual

2_ZR10_E(07-33) 3/10/00 18:19

Basic Recording

E
Before you start recording
Have you completed the following steps?
• Attached a power source (
• Removed the lens cap (
• Chosen the display: viewfinder (
• When you're using the viewfinder, fully close the LCD or rotate the LCD so that
it faces the same direction as the lens (
• When using the viewfinder with the BP-522 Battery Pack (optional) attached,
extend the viewfinder (
You may also want to install the backup battery (
and time display (
To record
1. Push the small green button on the POWER switch and hold, turn
the POWER switch to CAMERA.
• The camera automatically sets to record pause mode. PAUSE appears in the
display.
• The camera power indicator lights up red.
• The confirmation beep sounds.
• The camera will turn itself off if you leave it in record pause mode for more
than about five minutes. To return to record pause mode, set the POWER
switch to OFF and then back to CAMERA.
2. Load a cassette (
18
Page 18 (1,1)
3
P
11).
86) and fastened the shoulder strap (
86) or LCD screen (
86).
41).
16).
1
4, 5
87).
23)
25).
90) in order to set the date