Canon zr10. Instruction Manual page 69

3_ZR10_E(34-72) 3/9/00 7:57 PM
Setting the data code
You can also choose which type of data code to display — either the date/time,
camera data or both.
(
1. Select DATA CODE from the VCR menu.
2. Choose between DATE/TIME, CAMERA DATA and CAM. & D/T.
3. Press the MENU button once more to close the menu.
Possible data code combinations:
D/TIME SEL.
• The data code will read "– – –" in the following situations:
– During playback of a blank section of tape.
– If the tape was recorded before entering the date and time in the camera's
memory.
– If the tape was recorded on a camera without a data code function.
– If noise or tape damage prevents the data code from being read.
• If a recording made on ZR10 is played back on a different DV camcorder, the
data code may not be displayed correctly.
• The data code will appear in the display even if DISPLAYS (
set to OFF through the VCR menu.
Page 69 (1,1)
DATA CODE•••DATE/TIME
36)
DATA CODE
Date/Time
Date
JAN. 1,2000
Time
12:00:00 AM
Date & Time
12:00 AM
JAN. 1,2000
Date/Time &
Camera data
Camera data
F32
F32 2 1/2000
1/2000
JAN. 1,2000
F32
F32 1/2000
1/2000 12:00:00 AM
F32
1/2000
F32 12:00 AM
1/2000 JAN. 1,2000
103) has been
E
69