AEG FSS62600P User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Dishwasher
  5. FSS62600P
  6. User manual
AEG FSS62600P User Manual

AEG FSS62600P User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FSS62600P
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading

Related Manuals for AEG FSS62600P

Summary of Contents for AEG FSS62600P

  • Page 1 FSS62600P User Manual Dishwasher USER MANUAL...

  • Page 2: Table Of Contents

    13. TECHNICAL INFORMATION................. 22 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 ENGLISH manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...

  • Page 4: Safety Instructions

    If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Put the cutlery in the cutlery basket with the sharp •...
  • Page 5 ENGLISH • Do not pull the mains cable to disconnect the mains plug from the disconnect the appliance. Always pull mains socket. Contact the Authorised the mains plug. Service Centre to replace the water • This appliance complies with the inlet hose.

  • Page 6: Product Description

    3. PRODUCT DESCRIPTION Top spray arm Rinse aid dispenser Upper spray arm Detergent dispenser Lower spray arm Cutlery basket Filters Lower basket Rating plate Upper basket Salt container Air vent 3.1 Beam-on-Floor The Beam-on-Floor is off when the appliance is The Beam-on-Floor is a light that is deactivated.

  • Page 7: Control Panel

    ENGLISH 4. CONTROL PANEL On/off button TimeSaver button Display XtraDry button Delay button RESET button Program button Indicators ExtraHygiene button 4.1 Indicators Indicator Description Salt indicator. It is on when the salt container needs refilling. Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. End indicator.
  • Page 8 Programme Degree of soil Programme phases Options Type of load • Normal or light • Wash 45 °C • XtraDry soil • Rinses • Delicate crock- • Dry ery and glass- ware • Fresh soil • Wash 60 °C •...

  • Page 9: Settings

    ENGLISH Water Energy Duration Programme (kWh) (min) 12 - 13 1.1 - 1.3 230 - 250 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 5.2 Information for test In your request please include the product number code (PNC) found on...
  • Page 10 Water hardness German de- French degrees mmol/l Clarke de- Water softener lev- grees (°dH) (°fH) grees 47 - 50 84 - 90 8.4 - 9.0 58 - 63 43 - 46 76 - 83 7.6 - 8.3 53 - 57...
  • Page 11 ENGLISH – = the rinse aid empty • The indicators notification is activated. are off. 2. Press to change the setting. • The indicator still flashes. 3. Press on/off to confirm the setting. • The display shows the current setting. 6.4 The rinse aid level –...

  • Page 12: Options

    • The indicators CAUTION! If children have access to the are off. appliance, it is advised to • The indicator still flashes. deactivate AirDry as opening • The display shows the current the door may pose a danger. setting.

  • Page 13: Before First Use

    ENGLISH 7.3 ExtraHygiene How to activate ExtraHygiene This option provides better hygiene Press results by keeping the temperature at 70 The related indicator is on. °C for at least 10 minutes during the last The display shows the updated rinsing phase. programme duration.

  • Page 14: Daily Use

    8.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid designed specifically for dishwashers. 1. Open the lid (C). 2. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation.

  • Page 15: Hints And Tips

    ENGLISH approximately 3 seconds and then Press and hold RESET until the appliance shows the programme duration. is in programme selection mode. 4. Set the applicable options. Cancelling the programme 5. Close the appliance door to start the programme. Press and hold RESET until the appliance is in programme selection mode.
  • Page 16 • Always use the whole space of the 3. Start the shortest programme with a baskets. rinsing phase. Do not add detergent • Make sure that items in the baskets and do not load the baskets. do not touch or cover each other.

  • Page 17: Care And Cleaning

    ENGLISH 10.6 Unloading the baskets After the programme is completed, water can still 1. Let the tableware cool down before remain on the inside you remove it from the appliance. surfaces of the appliance. Hot items can be easily damaged. 2.
  • Page 18 3. Wash the spray arm under running 7. Reassemble the filters (B) and (C). water. Use a thin pointed tool, e.g. a 8. Put back the filter (B) in the flat filter toothpick, to remove particles of soil from the holes.

  • Page 19: Troubleshooting

    ENGLISH 11.4 Internal cleaning • Do not use abrasive products, abrasive cleaning pads, sharp tools, • Carefully clean the appliance, strong chemicals, scourer or solvents. including the rubber gasket of the • Using short-duration programmes door, with a soft damp cloth. regularly can cause grease and •...
  • Page 20 Problem and alarm code Possible cause and solution The anti-flood device is on. • Close the water tap and contact an Authorised Service Centre. The display shows The appliance stops and • It is normal. It provides optimal cleaning results and en- starts more times during op- ergy savings.
  • Page 21 ENGLISH 12.1 The washing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and the basket loading leaflet. • Use more intensive washing programmes. • Clean spray arm jets and the filter. Refer to "Care and Cleaning".

  • Page 22: Technical Information

    Problem Possible cause and solution There are residues of deter- • The detergent tablet got stuck in the dispenser and gent in the dispenser at the was not completely washed away by water. end of the programme. • Water cannot wash away the detergent from the dis- penser.
  • Page 23 ENGLISH Power consumption Left-on mode (W) Off-mode (W) 0.50 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption. 14.
  • Page 24 www.aeg.com/shop...

Table of Contents