Specifications - Makita 9564PC Instruction Manual

SPECIFICATIONS

Depressed center wheel diam-
eter Spindle thread
Max. wheel thickness
Rated speed (n) / No load speed (n
Overall length
• Due to our continuing program of research and development, the specifications herein are subject to change with-
out notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
DOUBLE INSULATION
Wear safety glasses.
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of the European Directive,
on Waste Electric and Electronic
Equipment and its implementation in
accordance with national law, electric
equipment that have reached the end of
their life must be collected separately and
returned to an environmentally compatible
recycling facility.
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Model 9564PCV
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model 9565PC, 9565PCV
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
115 mm M14
125 mm M14
150 mm M14
)
0
Net weight
Safety class
) : 81 dB (A)
pA
) : 92 dB (A)
WA
) : 82 dB (A)
pA
) : 93 dB (A)
WA
9564PC
9565PC
- 9566PC
7.2 mm 6.4 mm
-1
12,000 min 10,000 min
307 mm 307 mm
2.4 kg (9564PC) 2.5 kg
2.6 kg (9565PC)
Model 9566PCV
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model 9566PCV
Work mode : surface grinding with anti vibration side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model 9564PCV, 9565PC, 9565PCV
Work mode : surface grinding with anti vibration side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may also
be used in a preliminary assessment of exposure.
NOTE: The declared vibration emission value is used
for main applications of the power tool. However if the
power tool is used for other applications, the vibration
emission value may be different.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
2 ENGLISH
- 9564PCV
- 9565PCV
-
7.2 mm
-1 -1
12,000 min
307 mm
2.4 kg
/II
) : 84 dB (A)
pA
) : 95 dB (A)
WA
2
) : 8.5 m/s
h,AG
2
2
) : 2.5 m/s
h,DS
2
2
) : 10.0 m/s
h,AG
2
2
) : 2.5 m/s or less
h,DS
2
-
-
9566PCV
6.4 mm
-1
10,000 min
307 mm
2.7 kg