Honda F220 Owner's Manual page 42

Clutch cable adjustment
1.Set the handlebar height in the center position (see page 24).
2.Place the tiller on a level surface and remove the two screw bolts
from front cover, and remove the front cover (equipped type).
3.The clutch spring should extend 2.0±0.5 mm (0.08±0.02 in) when
the main clutch lever is moved from the DISENGAGED position to the
ENGAGED position.
4.If the spring extension length is incorrect, loosen the lock nut and
turn the adjusting nut in or out just enough to extend the spring. Do
not overtighten.
ADJUSTING NUT
SCREW BOLTS
LOCK NUT
FRONT COVER
CLUTCH SPRING END
2.0±0.5 mm
(0.08±0.02 in)
39