Makita WR100D Series Instruction Manual
Cordless ratchet wrench
Hide thumbs
Also See for WR100D Series:
- User manual ,
- Instruction manual (53 pages) ,
- Instruction manual (45 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita WR100D Series
Summary of Contents for Makita WR100D Series
- Page 1 INSTRUCTION MANUAL Cordless Ratchet Wrench WR100D Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: WR100D Fastening capacities (with Standard bolt M5 - M12 manual retightening) High tensile bolt M5 - M10 Square drive 6.35mm , 9.5mm No load speed 0 - 800 min Maximum fastening torque 47.5 N•m Overall length 341 mm Rated voltage D.C. -
Page 3: Ec Declaration Of Conformity
Do not expose power tools to rain or wet con- NOTE: The declared vibration total value(s) has been ditions. Water entering a power tool will increase measured in accordance with a standard test method the risk of electric shock. and may be used for comparing one tool with another. Do not abuse the cord. - Page 4 Battery tool use and care Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use power tools only with specifically desig- nated battery packs. Use of any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one...
- Page 5 CAUTION: Only use genuine Makita batteries. MISUSE or failure to follow the safety rules stated Use of non-genuine Makita batteries, or batteries that in this instruction manual may cause serious have been altered, may result in the battery bursting personal injury. causing fires, personal injury and damage. It will...
-
Page 6: Functional Description
Battery protection system FUNCTIONAL DESCRIPTION The tool is equipped with a battery protection system. This system automatically cuts off power to the motor to extend battery life. CAUTION: The tool will automatically stop during operation if the Always be sure that the tool is tool and/or battery are placed under one of the following switched off and the battery cartridge is removed conditions: before adjusting or checking function on the tool. Overloaded: Installing or removing battery The tool is operated in a manner that causes it to draw an abnormally high current. - Page 7 When not operating the tool, always slide the lock lever to the lock position Electric brake This tool is equipped with an electric brake. If the tool consistently fails to quickly stop after switch lever release, have tool serviced at a Makita service center. ► 1 . Reversing lever 7 ENGLISH...
-
Page 8: Operation
Installing or removing socket ASSEMBLY CAUTION: Before operation, make sure that CAUTION: Always be sure that the tool is the socket is properly locked onto the socket switched off and the battery cartridge is removed adaptor. Incomplete attachment of the socket may before carrying out any work on the tool. cause injury. -
Page 9: Optional Accessories
OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center. Using as hand tool •... - Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885720-221 www.makita.com 20190417...