DELIVERY AND DEALER SERVICE
Check that the cutting unit works and that no
unusual sounds are heard.
Using the lever, the cutting height can be
adjusted in 7 different positions.
Check that the hydraulic cutting unit lift is
functioning.
Engine Speed Regulator
Check that the engine's max. speed is
regulated to:
PR 17, PR 17 AWD
PF 21, PF 21 AWD
Final Inspection
Bleed the hydraulic system of excess air after
test running.
Check the oil level in the hydraulic tank and
top up if necessary.
Check that there are no leaks, including
engine oil and fuel leaks.
Replace the transmission cover.
Clean the machine if necessary, wipe up
spilled oil, finger marks (on steering wheel
and controls), dust, etc.
Administration
Fill in the sales papers, customer register,
etc.
Don't forget to fill in the serial number on
page 4 in the Operator's manual and to
confirm that the delivery service has been
performed in the service journal.
26
English-
2825-2975 rpm
2825-2975 rpm
Cutting height setting
Hydraulic cutting unit lift
Pre delivery service confirmation