Engine Speed Regulator; Final Inspection; Administration - Husqvarna Rider 16C AWD Workshop Manual

DELIVERY AND DEALER SERVICE
Check that the cutting unit works and that no
unusual sounds are heard.
Using the lever, the cutting height can be
adjusted in 7 different positions.

Engine Speed Regulator

Check that the engine's max. speed is
adjusted at: Max speed
Rider 16 AWD 2900–3100 rpm 1500 rpm
Rider 15T/s AWD 2825–2975 rpm 1500 rpm
Rider 18 AWD 2825–2975 rpm 1500 rpm

Final inspection

Bleed the hydraulic system of excess air after
test running.
Check the oil level in the hydraulic tank and
top up if necessary.
Check that there are no leaks, including
engine oil and fuel leaks.
Replace the transmission cover.
Clean the machine if necessary, wipe up
spilled oil, finger marks (on steering wheel
and controls), dust, etc.

Administration

Fill in the sales papers, customer register,
etc.
Don't forget to fill in the serial number in the
Operator's manual and to confirm that the
delivery service has been performed in the
service journal.
26
English-
Cutting height setting
Idling
Pre delivery service confirmation
8042-015
8009-228