Engine Speed Regulator; Hydraulic System; Administration - Husqvarna Rider ProFlex 21 II Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
Check that the cutting unit works and that no
unusual sounds are heard
Using the lever, the cutting height can be
adjusted in 7 different positions.
Check that the hydraulic cutting unit lift works.

Engine Speed Regulator

Check that the engine's max. speed is
regulated to:
Rider ProFlex 21 II

Hydraulic System

Bleed the hydraulic system of excess air after
test running. Check the oil level and top up if
necessary.
Check that there are no leaks, including
engine oil and fuel leaks.
Replace the transmission cover.

Administration

Fill in the sales papers, customer register, etc.
Don't forget to fill in the serial number on
page 3 in the operator's manual and to
confirm that the delivery service has been
performed in the service journal.
DELIVERY AND DEALER SERVICE
2,925-3,075 rpm
www.mymowerparts.com
Cutting height setting
Hydraulic cutting unit lift
Delivery service confirmation
8009-327
8009-326
8009-228
19
English-