Buffalo WLI2-CF-S11 User Manual page 65

3
1. Select "11Mbps Communication over AirStation" in the
"Network Mode" field.
2. Enter the AirStation ESS-ID to the "ESS-ID" field.
3. Click [OK].
The initial setting of the AirStation ESS-ID shows the last six digits of
the MAC address of the AirStation plus "GROUP" (upper-case).
4
Enter an "WEP Key" if encryption with WEP is used in the network. If
the AirStation is used in the initial state, no encryption is set. Leave the
area empty in this case.
5
⇒ Continued on next page
Click [OK].
AirStation retrieval will be
started.
WLI2-CF-S11 User's Manual
3
63