Lan Card Is Normally Operating - Buffalo WLI2-CF-S11 User Manual

Step 4
Step 1
Step 4
wireless LAN card is normally operating
Upon completion of the installation of the wireless LAN card drivers,
confirm that the installed wireless LAN card is normally operating by using
the procedure below.
1
Right-click [My Computer] on Desktop.
Click [Properties].
2
Click the [Device Manager] tab.
3
Confirm that "BUFFALO WLI-CF-S11G Wireless LAN Adapter" is
displayed under [Network adapters] without any error mark ("x" or
"!") indicated.
When "BUFFALO WLI-CF-S11G Wireless LAN Adapter" is displayed
without any error mark ("x" or "!"), your wireless LAN card is normally
operating.
If no driver name is listed or an error mark ("x" or "!") is
indicated
Your installed wireless LAN card is not normally operating in this case.
See "I want to uninstall the wireless LAN card" on page 106 in Chapter 5,
and then uninstall and re-install the wireless LAN cad drivers.
To make the AirStation settings
Refer to the AirStation manual to make the AirStation settings.
48
WLI2-CF-S11 User's Manual
Confirming that the installed