Preparing For Connecting To The Network; Connecting To The Network; Step 4 Checking The "Ip Address - Buffalo WLI2-CF-S11 User Manual

2.2

Preparing for Connecting to the Network

After installing the wireless LAN card in the Windows CE device, prepare
for connecting to the network.
For detailed information, refer to the manual included in the Windows
CE device or open the Windows CE Help.
Checking the "IP address"
Step 4
1
When the wireless LAN card is successfully installed, the
Windows CE device is automatically turned on to display the
window shown below.
• When a DHCP server exists within the network (e.g., when the
DHCP server function of the AirStation is used), select [Use server-
assigned IP address].
• To manually set the IP address, select [Use specific IP address].
Inquire the IP address, Subnet mask, and Default gateway from
your network administrator.
⇒ Continued on next page
Tap [OK].
Specify the [IP address].
WLI2-CF-S11 User's Manual
2
21