Table of Contents
Advertisement
To reset the extender to factory default settings, you can either use the Factory Reset button
on the side panel or log in to the extender and reset it.
For a list of factory default settings, see
To use the Factory Reset button to return the extender to factory default settings:
CAUTION:
This process erases any settings that you configured in the extender.
1.
Insert a straightened paper clip into the hole of the Factory Reset button and hold it for
about seven seconds.
2.
Release the button.
CAUTION:
Do not try to go online, turn off the extender, shut down the computer, or
do anything else to the extender until it finishes restarting!
The extender resets and restarts. This process takes about one minute.
To log in to the extender and reset the extender's to factory settings:
CAUTION:
This process erases any settings that you configured in the extender.
1.
On a computer or WiFi device that is connected to the extender network, launch a web
browser.
2.
In the address field of your browser, enter www.mywifiext.net.
AC750 WiF Range Extender
Factory Default Settings
Factory Reset button
Maintain and Monitor the Extender
38
on page 46.
Advertisement
Table of Contents
