Specifications; Intended Use - Makita DBO480 Instruction Manual

SPECIFICATIONS

Model:
Pad size
Abrasive paper
Orbits per minute
Overall length (with BL1860B)
Rated voltage
Net weight
* The standard pad differs from country to country.
Due to our continuing program of research and development, the specifications herein are subject to change without notice.
•
• Specifications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
•
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Symbols
The followings show the symbols which may be used for the equip-
ment. Be sure that you understand their meaning before use.
Read instruction manual.
Wear safety glasses.
Only for EU countries
Ni-MH
Li-ion
Due to the presence of hazardous components in the
equipment, waste electrical and electronic equip-
ment, accumulators and batteries may have a nega-
tive impact on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household waste!
In accordance with the European Directive on
waste electrical and electronic equipment and on
accumulators and batteries and waste accumu-
lators and batteries, as well as their adaptation to
national law, waste electrical equipment, batter-
ies and accumulators should be stored sepa-
rately and delivered to a separate collection point
for municipal waste, operating in accordance with
the regulations on environmental protection.
This is indicated by the symbol of the crossed-
out wheeled bin placed on the equipment.
Square pad
Triangular pad
Rectangular pad
For square pad (Hook and loop)
For square pad (Clamp)
For triangular pad
For rectangular pad
High
Low
DBO480
112 mm x 168.5 mm
Rectangular paper: 114 mm x 102 mm
Triangular paper: 96 mm
112 mm x 168.5 mm, 112 mm x 66 mm
1.4 - 1.7 kg
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /

Intended use

The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-4:
Model DBO480
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
Model DBO481
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
Model DBO482
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
NOTE: The declared noise emission value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also
be used in a preliminary assessment of exposure.
2 ENGLISH
DBO481
112 mm x 102 mm
112 mm x 190 mm
114 mm x 102 mm
114 mm x 140 mm
-1
14,000 min
-1
11,000 min
171 mm
D.C. 18 V
1.4 - 1.8 kg
DC18SH
) : 75 dB(A)
pA
) : 75 dB(A)
pA
) : 75 dB(A)
pA
DBO482