Connections To A Tv Or Vcr - JVC GR-D728EK Instructions Manual

Connections To A TV Or VCR

TV
A
Yellow to VIDEO IN (Connect when your
TV/VCR has only A/V input connectors).
B
Red to AUDIO R IN
C
White to AUDIO L IN
To AV
connector
or
Audio/Video
cable
(provided)
A B C
VCR
VIDEO PLAYBACK
1
Make sure all units are turned off.
2
Connect the camcorder to a TV or VCR as
shown in the illustration.
If using a VCR, go to step 3.
If not, go to step 4.
3
Connect the VCR output to the TV input,
referring to your VCR's instruction manual.
4
Turn on the camcorder, the VCR and the TV.
5
Set the VCR to its AUX input mode, and set
the TV to its VIDEO mode.
6
Start playback on the camcorder. (
● Please set "16:9 OUTPUT" of Playback Menus so
that the image may suit your TV (16:9 TV or 4:3
TV). ( pg. 17, 28)
To choose whether or not the following
displays appear on the connected TV
● Date/Time
Set "DATE/TIME" to "ON" or "OFF".
( pg. 28)
● Time Code
Set "TIME CODE" to "ON" or "OFF". (
● Indications other than date/time and time code
Set "ON SCREEN" to "OFF", "LCD" or "LCD/TV".
( pg. 28)
NOTES:
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
( pg. 14)
● To monitor the picture and sound from the
camcorder without inserting a tape, set the
camcorder's Power Switch to
your TV to the appropriate input mode.
● Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
23
EN
pg. 21)
pg. 28)
"REC"
, then set