White Balance Adjustment; Manual White Balance Adjustment; Wipe Or Fader Effects - JVC GR-D728EK Instructions Manual

To lock the iris
After step 3, press and hold SET over 2
seconds. The " " indication appears and the
iris is locked.
To cancel Spot Exposure Control
Press once so that the "
disappears.
NOTES:
● Depending on the shooting location and condition,
optimum result may not be attained.
● "STROBE" in "EFFECT" cannot be used with Spot
Exposure Control.

White Balance Adjustment

The white balance refers to the correctness of
colour reproduction under various lighting. If the
white balance is correct, all other colours will be
accurately reproduced.
The white balance is usually adjusted
automatically. However, more advanced
camcorder operators control this function
manually to achieve a more professional colour/
tint reproduction.
To change the setting
Set "W.BALANCE" to the desired mode.
● The selected mode indicator except "AUTO"
appears.
[AUTO]: White balance is adjusted
automatically.
MWB: Adjust the white balance manually
when shooting under various types of lighting.

"Manual White Balance Adjustment" (

FINE: Outdoors on a sunny day.
CLOUD: Outdoors on a cloudy day.
HALOGEN: A video light or similar type of
lighting is used.
Manual White Balance Adjustment
Adjust the white balance
manually when shooting
under various types of
lighting.
1
Set the Power Switch
to "REC".
2
Set the recording mode to "M". (
3
Hold a sheet of plain white paper in front of
the subject. Adjust zoom or position yourself so
that the white paper fills the screen.
4
(
● When the setting is completed,
5
" indicator
6
the Manual White Balance indicator
displayed.
NOTES:
● In step 3, it may be difficult to focus on the white
● Because the colour temperature is different
● Once you adjust white balance manually, the
● White Balance cannot be activated
● White Balance cannot be activated if the "SEPIA"
These effects let you make pro-style scene
transitions. Use them to spice up the transition
from one scene to the next.
Wipe or Fader works when video recording is
started or stopped.
1
pg. 31).
2
3
(
4
activate the Fade-in/out or Wipe-in/out.
NOTE:
You can extend the length of a Wipe or Fader by
pressing and holding the Recording Start/Stop
Button.
White paper
pg. 20)
FEATURES FOR RECORDING
Select "MWB" in "W.BALANCE" menu.
pg. 25), then press and hold SET or
begins blinking.
blinking.
Press SET or to engage the setting.
Press MENU. The Menu Screen closes and
paper. In such a case, adjust focus manually.
( pg. 29)
depending on the light source, use this function for
a more natural result.
setting is retained even if the power is turned off or
the battery removed.
simultaneously with "TWILIGHT" in "PROGRAM
AE" ( pg. 32).
or "MONOTONE" mode is activated.

Wipe Or Fader Effects

Set the Power Switch to "REC".
Set the recording mode to "M". (
Set "WIPE/FADER" in
pg. 25)
Press the Recording Start/Stop Button to
31
EN
until
stops
is
pg. 20)
.
FUNCTION Menu
CONTINUED ON NEXT PAGE