Connections To A Tv Or Vcr - JVC GR-D248EZ Instructions Manual

● The detected blank portion may be located
between recorded scenes. Before you start
recording, make sure there is no recorded scene
after the blank portion.

Connections To A TV Or VCR

To AV
connector
S/AV cable
(provided)
1 2
"Y/C"/"CVBS"
Video Out Select
Switch
To TV or VCR
A
Black to S-VIDEO IN (Connect when your TV/
VCR has S-VIDEO IN and A/V input
connectors. In this case, it is not necessary to
connect the yellow video cable.)
B
Yellow to VIDEO IN (Connect when your TV/
VCR has only A/V input connectors.)
C
Red to AUDIO R IN**
D
White to AUDIO L IN**
* If your VCR has a SCART connector, use the
provided cable adapter.
** Not required for watching still images only.
NOTE:
Set the video out select switch of the cable adapter
as required:
Y/C: When connecting to a TV or VCR which
accepts Y/C signals and uses an S-Video cable.
CVBS: When connecting to a TV or VCR which
does not accept Y/C signals and uses an audio/
video cable.
Open the cover.
mark
3 4
Cable
Adapter*
VCR
1
Make sure all units are turned off.
2
Connect the camcorder to a TV or VCR as
shown in the illustration.
If using a VCR, go to step 3.
If not, go to step 4.
3
Connect the VCR output to the TV input,
referring to your VCR's instruction manual.
4
Turn on the camcorder, the VCR and the TV.
5
Set the VCR to its AUX input mode, and set
the TV to its VIDEO mode.
6
Start playback on the camcorder. (
To choose whether or not the following
displays appear on the connected TV
● Date/Time
Set "DATE/TIME" to "AUTO", "ON" or "OFF".
( pg. 22, 27)
● Time Code
Set "TIME CODE" to "ON" or "OFF".
( pg. 22, 27)
● Indications other than date/time and time code
Set "ON SCREEN" to "OFF", "LCD" or "LCD/TV".
( pg. 22, 27)
NOTES:
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
TV
( pg. 13)
● To monitor the picture and sound from the
camcorder without inserting a tape, set the
camcorder's Power Switch to "A" or "M", then set
your TV to the appropriate input mode.
● Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
VIDEO PLAYBACK 21
EN
pg. 20)