Using The Path Mtu Discovery Tool - Cisco FM3200 Base Installation And Configuration Manual

Figure 32. Advanced Tools window (Bandwidth test tool)
3. Click the
• The bandwidth test result will be shown below the test
controls.

Using the Path MTU discovery tool

The Path MTU discovery tool tests the size of the maximum transmission
unit (in other words, the largest protocol data unit that can be
communicated in a single network layer transaction).
To use the Path MTU discovery tool, do the following steps:
1. Determine what wireless link is to be tested between the
Cisco unit and another unit in the wireless network. Get theIP
address of the other unit.
2. Enter the IP address of the second unit in the Path MTU
discovery field
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
Run button to the right of the IP address field.
(Figure 33 (page 88)).
Page 87 of 176