Panasonic KV-N1058X Operating Manual page 40

6.2.3 Information display area
Network Setting
Item
LAN mode
DHCP
AutoIP
IP Address
Subnet Mask
Default Gateway
DNS Server 1
DNS Server 2
WINS Server 1
WINS Server 2
IP Filtering
HTTPd
MAC Address
Host Name
*1
Location
*1
For details, refer to "12.2.1 Available characters in Configuration Web" (page 95).
*1
40
Displays the LAN mode (Wired LAN / Wireless LAN / Wireless LAN (AP)).
Enable (On) or disable (Off) DHCP.
Enable (On) or disable (Off) Auto IP. If DHCP is disabled, this setting cannot
be changed. This setting can also be changed from Network Setting Tool
(page 136).
Set the IP address. If DHCP is enabled, this will be set automatically and
cannot be changed. This setting can also be changed from Network Setting
Tool (page 136).
Set the subnet mask. If DHCP is enabled, this will be set automatically and
cannot be changed. This setting can also be changed from Network Setting
Tool (page 136).
Set the default gateway. If DHCP is enabled, this will be set automatically and
cannot be changed. This setting can also be changed from Network Setting
Tool (page 136).
Set the primary DNS server.
Set the secondary DNS server.
Set the primary WINS server.
Set the secondary WINS server.
Enable (On) or disable (Off) the IP filtering function.
Enable (On) or disable (Off) the HTTPd.
If HTTPd is disabled, "Configuration Web" is not available.
Display the scanner's MAC Address.
Set the host name for the scanner (up to 15 characters).
You can input the location comment (up to 31 characters).
Contents