Manually Upload Firmware To The Extender - NETGEAR EX6250 User Manual

Note: You might need to unzip the firmware file. The firmware update process takes
about two minutes.

Manually upload firmware to the extender

If you want to upload a specific firmware version, follow these instructions.
To manually upload a firmware file to your extender:
1. Download the firmware file for your extender from the NETGEAR Download Center,
save it to your desktop, and unzip the file if needed.
Note: The correct firmware file uses an
2. Launch a web browser from a computer or mobile device that is connected to your
extender network.
3. Log in to your extender:
• If you did not enable the One WiFi Name feature, enter http://mywifiext.local/
in the address field of the browser.
• If you enabled the One WiFi Name feature, enter one of the following URLs:
Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-
Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-
Android devices. http://<extender's IP address>/ (for example,
-
http://192.168.1.3/)
For more information about how to find your extender's IP address, see Find
the extender's IP address on page 58.
A login page displays.
4. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
5.
If your browser displays the Menu icon
The extender menu displays.
6. Select Firmware Update.
The Firmware Update page displays.
7. Click the BROWSE button.
8. Locate and select the new firmware file.
Maintain and monitor the
extender
AC1750 WiFi Mesh Extender
extension.
.img
, click it.
32 User Manual