Table of Contents
Advertisement
Available languages
Available languages
Mount the inner flange onto the spindle.
Fit the wheel / disc on the inner flange and screw the
lock nut onto the spindle.
1
2
3
► 1. Lock nut 2. Abrasive cut-off wheel / diamond
wheel 3. Inner flange 4. Wheel guard for abrasive
cut-off wheel / diamond wheel
For United States and Canada
ø45
1
ø78
2
3
ø78
4
► 1. Lock nut 2. Outer flange 78 3. Abrasive cut-off
wheel / diamond wheel 4. Inner flange 78 5. Wheel
guard for abrasive cut-off wheel / diamond wheel
Operation with cup-type diamond
wheel
Optional accessory
Only for model GA7060R / GA9060R
WARNING:
only for use in grinding flat concrete with a cup-
type diamond wheel. Do not use it with grinding
stones or for any purpose other than mentioned.
4
1
2
4
5
6
► 1. Lock nut 2. Cup-type diamond wheel 3. Hubbed
cup-type diamond wheel 4. Inner flange 5. Dust
collecting wheel guard 6. Bearing box
1.
Remove grinder disc and wheel guard from the
tool.
2.
Loosen attaching screw on dust collecting wheel
guard until attaching slot opens.
5
► 1. Attaching screw
11 ENGLISH
Dust collecting wheel guard is
1
3
Advertisement
Table of Contents
