Operation Instructions - Black & Decker BUFK12W Instruction Manual

SET UP & USE

OPERATION INSTRUCTIONS

TEMPERATURE CONTROL
NOTE: · If the freezer has been placed in a horizontal or tilted position for any period of time
wait 24 hours before plugging the unit in.
• The settings of the temperature control are "OFF, 1, 2, 3, 4, 5, 6, 7." Adjust the
temperature control to the setting that best suits your needs. The setting of
"4" should be appropriate for home or office use.
• Turning the temperature to "OFF" position will shut off the cooling cycle, but
does not turn off the electrical power to the unit.
NOTE: · Wait 3-5 minutes before restarting if you unplug the freezer. The unit may fail to
operate properly if restarted too quickly.
· If the ambient temperature is too high, the freezer may not reach the desired target
temperature.
· Large amounts of foods will lower the cooling efficiency of the appliance.
· If you choose to change the thermostat setting, adjust thermostat control one
increment at a time. Allow several hours for temperature to stabilize between
adjustments.
FREEZER INTERIOR SHELF
1. Carefully tilt the shelf up and slide forward until
the shelf has been completely removed.
2. Slide the shelf back to replace.
Page 9