Specifications - Makita 9924DB Instruction Manual

ENGLISH (Original instructions)
1-1. Lock button
1-2. Switch trigger
2-1. Speed change switch
3-1. Lever

SPECIFICATIONS

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sanding of large surface of wood,
plastic and metal materials as well as painted surfaces.
Power supply
The tool should be connected only to a power supply of the
same voltage as indicated on the nameplate, and can only be
operated on single-phase AC supply. They are double-insulated
and can, therefore, also be used from sockets without earth wire.
Noise
The typical A-weighted
according to EN60745:
Model 9401
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model 9402
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model 9924DB
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Explanation of general view
5-1. Adjusting knob
6-1. Dust spout
6-2. Dust bag
8-1. Limit mark
Model
Belt size
Belt speed
Overall length
Net weight
Safety class
noise level determined
) : 89 dB (A)
pA
) : 100 dB (A)
WA
) : 93 dB (A)
pA
) : 104 dB (A)
WA
) : 91 dB (A)
pA
) : 102 dB (A)
WA
value (tri-axial vector
9401
100 mm x 610 mm
5.8 m/s
ENE052-1
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENF002-2
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
ENG905-1
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Belt Sander
Model No./ Type: 9401,9402,9924DB
Conforms to the following European Directives:
2006/42/EC
ENG900-1
They are manufactured in accordance with the following
sum)
standard or standardized documents:
EN60745
3
9-1. Screwdriver
9-2. Brush holder cap
9402
H 5.8 m/s
L 5.0 m/s
374 mm
7.4 kg
/II
) : 2.5 m/s
h
2
9924DB
76 mm x 610 mm
6.6 m/s
355 mm
4.8 kg
2
or less
ENG901-1
ENH101-18