Table of Contents
Advertisement
5.
Reprocessing Procedure
The probe, magnetic sensor attachment and spacer for EZU-RV2S must be
reprocessed after each use. Refer to the reprocessing instruction in
this chapter.
Please refer to the instruction manual of option EZU-PA7L2 about the
method of handling, cleaning and sterilizing the EZU-PA7L2
WARNINGS
Limitations on
reprocessing
Transportation
before using
‐
The probe is delivered unsterile. Prior to the first
use, reprocess the probe.
‐
Temperature should not exceed 60°C during
reprocessing.
‐
Probe connector is not water resistant.
The probe is not completely submersible. The immersible
part is shown in Fig. 1. The un-immersible part should
be disinfected by wipe disinfection.
The probe should be packed in a sterile pouch or
container to transport from Central Sterile Supply
Department (CSSD) to an operating room. Be careful not
to damage the sterile pouch or container during
transportation.
-14-
Q1E-EP1041
Advertisement
Table of Contents
