2.
Inspection before Use
Prior to use, the probe must be carefully inspected that it is
appropriate for use.
2.1
Inspection of appropriate connection
2.1.1 Confirm that the system is correctly operating. Refer to the
instruction manual for the ultrasound diagnostic scanner.
2.1.2 Do not attach or connect unauthorized devices or instruments
on the probe, such as unauthorized biopsy attachments.
2.2
Inspection of material surface
2.2.1 Visually inspect the surface of the probe head, housing, the
cable and the connector for any crack, scratch or
denaturalization. If you find any damage, do not use the probe,
and immediately contact a service support.
2.2.2 Visually inspect the magnetic sensor attachment and the
spacer for EZU-RV2S for any crack, deformation or
denaturalization. If you find any damage, do not use them
and contact a service support immediately.
2.2.3 Visually inspect the elasto coupler for any crack,
deformation or denaturalization. If you find any damage, do
not use the elasto coupler and contact a service support
immediately.
-4-
Q1E-EP1041