Table of Contents
Advertisement
The spacer for EZU-RV2S is small, please do not lose the spacer.
4.2
Magnetic sensor EZU-RV3S
The EZU-RV3S is shown in Fig. 7.
Direction mark
4.2.1 How to attach the Magnetic sensor
The procedure of attaching the magnetic sensor is as follows.
1) Attach the magnetic sensor into the probe with the correct
direction as shown in Fig. 8.
2) Place the magnetic sensor attachment on the probe as shown
in Fig. 9. Fit the projected part of the magnetic sensor
attachment in the index mark of the probe.
1)
Projected part of
the Magnetic sensor attachment
Fig. 8
How to attach the Magnetic sensor attachment
Fig. 7
Magnetic sensor EZU-RV3S
Magnetic sensor (EZU-RV3S: White)
Direction mark of the EZU-RV3S
(Place the direction mark upward as
shown here.)
Fit the insertion direction
CAUTION
-10-
Sensor (white)
Q1E-EP1041
Advertisement
Table of Contents
