Honeywell VA201T Calibration Handbook page 77

Alignment Telescope
Mirror Assembly
Latch Assembly
Bayonet Locating Pin (2x)
Bayonet Slot (2x)
Datum Mount
Mirror Assembly
8. Latch-style assembly consists of
Telescope and mirror
Latching mechanism
Can be used with Trident or non-Trident units
Fit datum mount of alignment telescope securely over unit cowl so mirror face is visible. Ensure datum
mount is fully seated on cowl. Undo latches on telescope's mounting latch assembly and rotate assembly
so parallel support bar fits underneath unit as indicated by arrow 2. Locate latch mounting hooks behind
back of unit. Rotate telescope to a comfortable viewing position, then secure latches as indicated by arrow 3.
Proceed with alignment
Searchline Excel
Datum Mount
Mounting
Latch (2x)
Calibration Handbook
Telescope Viewfinder
Cowl
1
Excel Unit
77
Excel Unit
Alignment Telescope
Telescope Viewfinder
Locking Handle