Listening To Dab Stations (Australia, U.k., And Europe Models Only) - Yamaha TSX-N237 Owner's Manual

Listening to DAB stations (Australia, U.K., and
Europe models only)
Initial scan
Press RADIO repeatedly to select DAB.
RADIO
• Initial scan starts automatically when you select DAB for the
first time.
• When scanning is completed, the number of receivable DAB
stations is displayed momentarily, and the first station stored
is played.
Tuning in DAB stations
1
Press RADIO repeatedly to select DAB.
When the unit cannot receive the DAB signal, "Off Air" is
displayed.
2
qwer
ENTER
Press e or r to select a DAB station.
OPTION
Note
• Initial scan can also be performed from the option settings.
1 Press OPTION when DAB is selected as the input source.
2 Use e/r to select
3 Use q/w to select Initial scan, and press ENTER.
The initial scan display is shown.
4 Use e/r to select OK, and press ENTER to begin the initial
scan.
"Complete" is displayed when the initial scan is complete.
• If an initial scan is performed, stored DAB station information and
preset DAB stations are cleared.
• This unit can receive only Band III DAB frequencies.
15
Play from an input source
, and press ENTER.
DAB
Frequency in MHz/Channel label