Listening To Dab Stations (Australia, U.k., And Europe Models Only) - Yamaha MusicCast 200 Owner's Manual

Listening to DAB stations (Australia, U.K., and
Europe models only)
Initial scan
Press RADIO repeatedly to select DAB.
RADIO
Initial scan starts automatically when you select DAB for the
first time.
When scanning is completed, the number of receivable DAB
stations is displayed momentarily, and the first station stored
is played.
Tuning in DAB stations
1
Press RADIO repeatedly to select DAB.
When the unit cannot receive the DAB signal, "Off Air" is
displayed.
qwer
2
ENTER
Press e or r to select a DAB station.
OPTION
Initial scan can also be performed from the option settings.
1 Press OPTION when DAB is selected as the input source.
2 Use e/r to select
3 Use q/w to select Initial scan, and press ENTER.
The initial scan display is shown.
4 Use e/r to select OK, and press ENTER to begin the initial
scan.
"Complete" is displayed when the initial scan is complete.
If an initial scan is performed, stored DAB station information and
preset DAB stations are cleared.
This unit can receive only Band III DAB frequencies.
16
Play from an input source
, and press ENTER.
DAB
Frequency in MHz/Channel label