Listening To Dab Stations (Australia Model Only) - Yamaha TSX-B237 Owner's Manual

Listening to DAB stations (Australia model only)

Initial scan
Press RADIO repeatedly to select DAB.
Initial scan starts automatically when you select DAB for the
RADIO
first time.
When scanning is completed, the number of receivable DAB
stations is displayed momentarily, and the first station stored
is played.
Tuning in DAB stations
1
Press RADIO repeatedly to select DAB.
When the unit cannot receive the DAB signal, "Off Air" is
displayed.
2
Press e or r to select a DAB station.
qwer
ENTER
OPTION
Initial scan can also be performed from the option settings.
1 Press OPTION when DAB is selected as the input source.
2 Use e/r to select
3 Use q/w to select Initial Scan and press ENTER.
The initial scan display is shown.
4 Press ENTER to begin the initial scan.
"Completed!" is displayed when the initial scan is complete.
If an initial scan is performed, stored DAB station information and
preset DAB stations are cleared.
This unit can receive only Band III DAB frequencies.
15
Play from an input source
and press ENTER.
DAB
Frequency in MHz/Channel label