Table of Contents
Advertisement
FACTORY-INSTALLED OPTIONS
LIGHT BAR INSTALLATION
1. Connect light bar electrical connector to the light bar
electrical harness.
NOTICE
Some parts removed from image to improve illustration
2. Install bumper screen
w
3. Install cable tie
to secure wire lead to front bumper.
13.16
clarity.
e
.
4. Install light bar assembly mounting hardware
Torque to specification.
TORQUE
Light Bar Mounting Hardware:
35 lb-in (3.92 Nm)
NOTICE
Light bar should be aimed horizontally for best
performance.
5. Confirm light illuminates with keyswitch in ACC and
ON positions.
LIGHT BAR SWITCH
SWITCH CONTINUITY
SWITCH POSITION
Off
On
9850067 R01 - 2020-2021 GENERAL / GENERAL XP Service Manual
q
.
CONTINUITY BETWEEN
No continuity between
pins 2 and 3
Continuity between pins 2
and 3
© Copyright Polaris Inc.
Advertisement
Chapters
Table of Contents
Troubleshooting
