Table of Contents
Advertisement
For tool without the ring
► 1 . Hex bolt 2. Outer flange 3. Circular saw blade
4. Inner flange
For tool with the ring
► 1 . Hex bolt 2. Outer flange 3. Circular saw blade
4. Ring 5. Inner flange
To install the circular saw blade, follow the removal
procedure in reverse.
For tool with the inner flange for
other than 15.88 mm hole-diameter
1
saw blade
The inner flange has a certain diameter protrusion on one
2
side of it and a different diameter protrusion on the other side.
Choose a correct side on which protrusion fits into the saw
blade hole perfectly. Mount the inner flange onto the mounting
shaft so that the correct side of protrusion on the inner flange
3
faces outward and then place saw blade and outer flange.
4
1
► 1 . Mounting shaft 2. Inner flange 3. Circular saw
blade 4. Outer flange 5. Hex bolt
WARNING:
BOLT CLOCKWISE SECURELY. Also be careful
1
not to tighten the bolt forcibly. Slipping your hand
from the hex wrench can cause a personal injury.
WARNING:
2
on the inner flange that is positioned outside fits
into the saw blade hole "a" perfectly. Mounting the
3
blade on the wrong side can result in the dangerous
vibration.
4
For tool with the inner flange for a
5
15.88 mm hole-diameter saw blade
(country specific)
Mount the inner flange with its recessed side facing
outward onto the mounting shaft and then place circu-
lar saw blade (with the ring attached if needed), outer
flange and hex bolt.
For tool without the ring
1
► 1 . Mounting shaft 2. Inner flange 3. Circular saw
blade 4. Outer flange 5. Hex bolt
13 ENGLISH
2
3
BE SURE TO TIGHTEN THE HEX
Make sure that the protrusion "a"
2
3
5
4
5
4
Advertisement
Table of Contents
