...2 OPERATION
2.3 Operating Page
2.3.1 Single Input pH
7. 0 0
pH
24. 4
Deg.C
Monitoring pH
404
mV
Millivolts
100. 0
%
7. 0 0
pH
A: Slope & Check
6
Measured Values
pH.
Temperature.
Measured Millivolts
Millivolts.
% Slope and pH Check Value
% slope value.
A value between the programmed minimum % slope value (see
page – Section 5.3) and 105% is displayed. If the value is outside these
CONFIG. SENSORS
limits, check the electrode system.
pH check value (zero point).
Displayed as an additional indication of pH electrode system condition; 7pH is the
optimum value for glass electrodes and 0pH for Antimony electrodes.
Alarm 3 set to
Wash Function
Alarm 3 not set to
Monitoring pH
(
, Section 5.4) – see Section 2.3.3.
Wash
A3: Type
.
Wash
in the
Set Min Slope