Removing The Wi-Fi Card Module - Lenovo 10A4 Hardware Maintenance Manual

Figure 87. Removing the Wi-Fi adapter card
Note: The card fits tightly into the card slot. If necessary, alternate moving each side of the card a small
amount until it is removed from the card slot.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 150.

Removing the Wi-Fi card module

To remove the Wi-Fi card module, do the following:
1. Remove the Wi-Fi adapter card from the computer, and then disconnect the front and rear Wi-Fi antenna
cables from the Wi-Fi card module.
Chapter 8
.
Replacing FRUs (machine types: 10A0, 10A1, 10A6, 10A7, 10AG, 10AK, 10AL, and 10BE)
141