Video Settings - Cobra DASH2208 User Manual

VIDEO SETTINGS

Video Resolution:
This setting allows you to set the video recording resolution:
Higher resolutions will give you a sharper image, but take up more memory on the card.
The available resolutions are:
1296P Super HD
1080P Full HD
720P HD 60fps
720P HD 30fps
Dual View Models Only – For dual camera models, Video Resolution is broken down into Cam1
Resolution and Cam2 Resolution. Note that 720P 30fps is the only resolution option
for Cam2. When in Dual Cam Mode, Cam1 is limited to 1080P Full HD.
Loop Clip Time:
This setting allows you to control the duration of each individual loop clip. Clips can be set to
durations of 3 minutes, 5 minutes, 10 minutes, or off. In general, 3-minute clips are preferred
because the file size is much more manageable when transferring to a computer for editing.
G-Sensor:
The Drive HD Dash Cam includes a built in G-Sensor which allows the device to determine when
the car has been in a collision. If it detects a collision, it automatically locks the recording being
made at the time of the accident. You can use this setting to set the sensitivity of the G-Sensor
from 1-3 or turn it off. Level 1 is the easiest to activate the G-sensor and the G-Sensor may lock
files due to bumps like potholes and the SD card may fill up with protected files. Level 3 is the
hardest to activate the G-sensor.
Level 1<>
Level 2 <<>>
Level 3 <<<>>>
13 | P a g e
2304x1296 30 Frames per Second
1920x1080 30 Frames per Second
1280x720 60 Frames per Second
1280x720 30 Frames per Second
= Easiest to activate the G-sensor
= Moderate to activate the G-Sensor
= Hardest to activate the G-sensor