Table of Contents
Advertisement
10. SOFTWARE RAID1
10.6.5 Consistency check feature
The consistency check feature checks the consistency of data in all areas of the HDDs in drive bay 1 and drive bay
2. Use this feature for periodic inspection to enhance the availability of the equipment.
NOTE
• The consistency check feature is enabled only while both drives are in the ONLINE state. In other states, this
feature is disabled and cannot be selected in the menu window.
• The consistency check takes about 90 minutes. However, the checking time increases if many mismatches of
data are found and many sectors must be corrected.
Use the consistency check feature as follows:
1. Use the procedure described in 10.6.2(1) to display the Soft RAID Utility menu window.
10-34
Advertisement
Table of Contents
