Log Information Collection Command (Logsave); Table 8-4 Information Saved By The Logsave Command - Hitachi HF-W2000 58 Instruction Manual

8.4.1 Log information collection command (logsave)

Name
logsave - Collects log information
Syntax
logsave [-e file-name][directory]
Functionality
The logsave command saves data used for preventive maintenance and post-failure analysis of problems. The
data is compressed and recorded as a single file with the file name logsave.zip.
The following options are available for this command. If no option is specified, the logsave directory is created
directly under the system drive (usually C:\), and data is saved in that directory.
-e file-name: Data previously saved by the logsave command will be decompressed. For the file name, specify
the absolute path of the file that you want to decompress. If you do not use this option, the logsave
command will save the data.
directory: When you are not using the -e option, specify the directory in which you want to store the saved data. If
this option is not used the logsave directory is created directly under the system drive (usually C:\),
and data is saved in that directory.
When you are using the -e option, specify the directory where you want to store the decompressed data.
If you do not use this option, the data is decompressed in the current directory.
Table 8-4 shows the information collected by the logsave command.
Item
®
Windows event log file
RAS software log data
RAS software user settings information
®
Windows version information
Minimum memory dump
System information
Output of the RAS information display
command
Output of the ipconfig command
RAID log data
®
Windows setup log

Table 8-4 Information saved by the logsave command

Backup of the event log file
RAS software operation log
User settings definition file for pop-up notifications
Version information for Windows
Files in the directory used for storing a minimum memory dump
System information that includes hardware resources and the software
environment
Status of the equipment, such as the status of the fan and the temperature
inside the chassis, as well as configuration information about the RAS
software
Network that sets information
RAID operational logs (for the B model only)
Log files from Windows
Description
®
system files and driver files
®
setup
8-13
8. MAINTENANCE OPERATIONS