Enabling And Disabling The Digital Piano's Wireless Function; Adjusting The Notification Tone Volume Level - Casio Privia PX-S3100 Connection Manual

Enabling and Disabling the Digital
Piano's Wireless Function
1.
Connect the Wireless MIDI & audio adaptor to
the USB Type A port.
2.
Hold down the
appears on the display. Then release the
button.
This enters the FUNCTION mode.
3.
Use the and
"WIRELESS", and then touch
4.
Use the and
"Adaptor" and then touch
5.
Use the – and
setting between "On" and "Off".
• While the wireless function is enabled, the Bluetooth
indicator lights when the Digital Piano connects with
the paired external device. The indicator is unlit when
the wireless function is disabled.
6.
To exit the FUNCTION mode, hold down
EXIT until "[FUNCTION]" disappears from
the display.
■ Notification Tones
A change in the Bluetooth connection causes a notification
tone to sound.
This type of
connection:
Connection with a
Bluetooth audio device
Disconnection from a
Bluetooth audio device
Connection with a
Bluetooth Low Energy
MIDI device
Disconnection from a
Bluetooth Low Energy
MIDI device
EN-4
button until "[FUNCTION]"
buttons to display
ENTER.
buttons to display
ENTER.
+ buttons to switch the
Sounds this notification tone:
Rising piano tone melody
Falling piano tone melody
Rising vibraphone tone melody
Falling vibraphone tone melody
Adjusting the Notification Tone
Volume Level
1.
Hold down the
appears on the display. Then release the
button.
This enters the FUNCTION mode.
2.
Use the and
"WIRELESS", and then touch
3.
Use the and
"Notification Vol" and then touch
4.
Use the – and
setting.
• You can specify a volume value from 0 to 127.
• To return to the initial default setting, touch
+ at the same time.
5.
To exit the FUNCTION mode, hold down
EXIT until "[FUNCTION]" disappears from
the display.
button until "[FUNCTION]"
buttons to display
ENTER.
buttons to display
ENTER.
+ buttons to change the
– and