Outputting Digital Piano Notes Through An Amp Or Audio Equipment - Casio Privia PX-S3100 Connection Manual

■ To adjust the volume level of AUDIO IN jack input
1.
Hold down the
appears on the display. Then release the
button.
This enters the FUNCTION mode.
2.
Use the and
"AUDIO IN JACK" and then touch
3.
Use the and
"Volume" and then touch
4.
Use the – and
(K1) to change the setting.
• You can set the volume within the range of 0 to 127.
• To return to the initial default setting, touch
+ at the same time.
5.
To exit the FUNCTION mode, hold down
EXIT until "[FUNCTION]" disappears from
the display.
■ To change the center cancel setting of AUDIO IN
jack input
1.
Perform steps 1 and 2 under
volume level of AUDIO IN jack
2.
Use the and
"Center Cancel" and then touch
3.
Use the – or
setting between "On" (center cancel enabled)
and "Off" (center cancel disabled).
4.
To exit the FUNCTION mode, hold down
EXIT until "[FUNCTION]" disappears from
the display.
EN-6
button until "[FUNCTION]"
buttons to display
ENTER.
buttons to display
ENTER.
+ buttons, or Knob
"To adjust the
input".
buttons to display
ENTER.
+ buttons to switch the
Outputting Digital Piano Notes
Through an Amp or Audio
Equipment
You can connect audio equipment or a music amplifier to the
Digital Piano and then play through external speakers for
more powerful volume and better sound quality.
• Turn off the external device when making connections.
After connecting, turn down the Digital Piano and
external device volume levels whenever turning power
on or off.
• After connecting, turn on the Digital Piano and then the
external device.
• If keyboard notes are distorted when they are sounded
– and
from external audio equipment, lower the Digital
Piano's volume setting.
Connection requires commercially available connecting cords,
supplied by you.
Pin plugs
Audio amplifier AUX IN jacks, etc.
RIGHT (Red)
LEFT (White)
LINE OUT jacks
(Standard jack (6.3mm))
Guitar amplifier
Keyboard amplifier, etc.
INPUT 1
INPUT 2