Sounding A Bluetooth ® Audio Capable Device (Bluetooth Audio Pairing - Casio Privia PX-S3100 Connection Manual

Sounding a Bluetooth
Capable Device (Bluetooth Audio
Pairing)
You can use the included Wireless MIDI & audio adaptor to
pair the Digital Piano with a Bluetooth audio device and sound
the playback of the external device from the Digital Piano's
speakers.
• Before performing the pairing operation, turn down the
volume levels of the Digital Piano and the external
device.
• If external device notes sounded by this Digital Piano
are distorted, lower the external device's volume level.
• Due to Bluetooth characteristics, you may notice some
lag in notes. If that happens, connect using a USB
cable.
■ To pair the Digital Piano with a Bluetooth Audio
Capable Device
1.
Connect the Wireless MIDI & audio adaptor to
the USB Type A port.
Wireless MIDI & audio adaptor
USB Type A port
2.
On the Bluetooth setting screen that appears
on the external device, turn on the Bluetooth
function if it is off.
3.
Hold down the
appears on the display. Then release the
button.
This enters the FUNCTION mode.
4.
Use the and
"WIRELESS", and then touch
5.
Use the and
"Audio Pairing" and then touch
This causes the Digital Piano's Bluetooth indicator to
flash, which indicates pairing standby.
• If the Digital Piano's wireless function is turned off, it
will turn on automatically.
®
Audio
button until "[FUNCTION]"
buttons to display
ENTER.
buttons to display
ENTER.
6.
Use the setting screen of the Bluetooth audio
capable device to select "WU-BT10 AUDIO" to
pair with this Digital Piano.
• When pairing is complete, the Digital Piano's Bluetooth
indicator stops flashing and a piano tone notification
sounds.
• Now output from the external device will sound from
the Digital Piano's speakers.
7.
To exit the FUNCTION mode, hold down
EXIT until "[FUNCTION]" disappears from
the display.
• You need to turn on both the Digital Piano's wireless
function and the Bluetooth audio capable device's
Bluetooth function.
• To change the Digital Piano's wireless settings, see
"Enabling and Disabling the Digital Piano's Wireless
Function" (page EN-4).
• Information about the last Bluetooth audio capable devices
connected to this Digital Piano is registered by the Wireless
MIDI & audio adaptor. Because of this, it can automatically
perform Bluetooth audio pairing with the same device, so
you will not need to perform the Bluetooth audio pairing
operation again.
EN-1