Enabling And Disabling The Digital Piano's Wireless Function; Adjusting The Notification Tone Volume Level - Casio Privia PX-S1100 Connection Manual

Enabling and Disabling the Digital Piano's Wireless Function

1.
Connect the Wireless MIDI & audio adaptor to the
2.
While holding down
A0
• Each press toggles the wireless function between enabled and disabled.
• While the wireless function is enabled, the Bluetooth indicator lights when the Digital Piano connects with the paired
external device. The indicator is unlit when the wireless function is disabled.
• If the Wireless MIDI & audio adaptor is not attached to the Digital Piano when you turn it on, the Bluetooth indicator will
indicate an error by flashing.
3.
When the setting is the way you want, release
■ Notification Tones
A change in the Bluetooth connection causes a notification tone to sound.
This type of connection:
Connection with a Bluetooth audio device
Disconnection from a Bluetooth audio device
Connection with a Bluetooth Low Energy MIDI device
Disconnection from a Bluetooth Low Energy MIDI device

Adjusting the Notification Tone Volume Level

To adjust the notification tone volume, hold down
A0
E 1
Pressing this key:
E 1
E1
E 1 + E1
*1 You can adjust the volume value within a range of 0 to 10.
EN-4
FUNCTION, press the D1 keyboard key.
C1 C2 C3
D1
C1 C2 C3
E1
Lowers the notification tone volume by 1.
Raises the notification tone volume by 1.
Returns the notification tone volume to its initial default setting.
USB Type A port.
C4 C5
FUNCTION.
Rising piano tone melody
Falling piano tone melody
Rising vibraphone tone melody
Falling vibraphone tone melody
FUNCTION as you press the keyboard keys shown below.
C4 C5
Does this:
*1
*1
C6 C7 C8
Sounds this notification tone:
C6 C7 C8