Deleting Data From A Usb Flash Drive; Renaming Data On A Usb Flash Drive - Casio CT-X870IN User Manual

12.
Press the dk [+] (YES) key.
• The message "Wait" remains on the display while the
operation is being performed. Do not perform any
operation while this message is on the display.
"Complete" appears on the display after data save is
complete.
• To cancel the save operation, press the dk [–] (NO)
key.
Deleting Data from a USB Flash
Drive
Use the following procedure to delete USB flash drive data
(files).
1.
Insert the USB flash drive into the Digital
Keyboard's USB flash drive port.
2.
Press cs FUNCTION and then use the ct [2]
(o) and [3] (p) keys to display "Media".
3.
Press the ct [6] (ENTER) key.
4.
Use the ct [2] (o) and [3] (p) keys to
display "Delete".
5.
Press the ct [6] (ENTER) key.
6.
Use the ct [2] (o) and [3] (p) keys to select
the data type you want to delete.
7.
Press the ct [6] (ENTER) key.
8.
Use the ct number keys, and the dk [–] and [+]
keys to select the data you want to delete.
9.
Press the ct [6] (ENTER) key.
This displays a delete confirmation message ("Sure?").
10.
Press the dk [+] (YES) key.
• The message "Wait" remains on the display while the
operation is being performed. Do not perform any
operation while this message is on the display.
"Complete" appears on the display after data delete is
complete.
• To cancel the delete operation, press the dk [–] (NO)
key.
Renaming Data on a USB Flash
Drive
1.
Insert the USB flash drive into the Digital
Keyboard's USB flash drive port.
2.
Press cs FUNCTION and then use the ct [2]
(o) and [3] (p) keys to display "Media".
3.
Press the ct [6] (ENTER) key.
4.
Use the ct [2] (o) and [3] (p) keys to
display "Rename".
5.
Press the ct [6] (ENTER) key.
6.
Use the ct [2] (o) and [3] (p) keys to select
the data type you want to rename.
7.
Press the ct [6] (ENTER) key.
8.
Use the ct number keys, and the dk [–] and [+]
keys to select the data you want to rename.
9.
Press the ct [6] (ENTER) key.
10.
Rename the file as required.
(1) Use the ct [2] (o) and [3] (p) keys to move the
cursor to the character you want to change.
(2) Use the dk [–] and [+] keys to change the character.
• The characters you can select are shown below.
0 1 2 3
A
B C D
K L M N
U V W X
( )
- ^
• The Digital Keyboard displays the "~" character as
"3".
11.
After renaming the file, press the ct [6]
(ENTER) key.
This displays a confirmation message ("Sure?"). If there
already a file with the same name on the USB flash drive,
a confirmation message ("Replace?") will appear asking
if you want to overwrite it with the new data.
USB Flash Drive
4 5 6 7 8
E F G H I
O P Q R S
Y Z S & _
{ } @ ~ `
9
J
T
'
EN-51