Casio CT-X870IN User Manual page 44

FUNCTION Button (cs) Functions
You can use the cs FUNCTION button to change the volume and key, and to configure a variety of other settings.
To select a function
1.
Press cs FUNCTION to display the function menu.
This causes the FUNCTION indicator to appear on the display.
2.
Use the ct [2] (o) and [3] (p) keys to display the function you want.
• If you select a function that has sub-menus, press the ct [6] (ENTER) key, and then use the ct [2] (o) and [3] (p) keys
to select the sub-menu you want.
• If you are navigating through sub-menus, press [5] (EXIT) to return to the previous menu from your current location.
• Refer to the indicated pages for details about each function.
3.
Use the ct number keys, and the dk [–] and [+] keys to change the setting.
• If you want to use the ct number keys, press the [0] number key to display the NUM indicator before inputting a value.
4.
When the setting is the way you want, hold down the ct [5] (EXIT) key to exit the setting screen.
This causes the FUNCTION indicator to disappear from the display.
No.
1 Transpose
2 Octave Shift
3 Tone Part Upper 1 Octave Shift
4 Tone Part Upper 2 Octave Shift
5 Tone Part Lower Octave Shift
6 Split Point
7 Touch Response
8 Auto Accompaniment Volume
9 Song Volume
10 Metronome
11 Metronome Beat
12 Metronome Volume
13 Chord Mode
14 Auto Harmonize/Arpeggiator
15 Auto Harmonize/Arpeggiator Button Assignment
16 Auto Harmonize Type
17 Arpeggiator Type
18 Arpeggiator Hold
19 Reverb
20 Chorus
21 Equalizer
Function Display Setting Range
Trans. –12 - 12
Octave
U1 Oct. –3 - 3
U2 Oct. –3 - 3
L Oct. –3 - 3
Split Pt 36 - 96
Touch 1 - 4
AcompVol 0 - 127
Song Vol 0 - 127
Metronom
Beat 0 - 9
Volume 0 - 127
ChordMod 1 - 6
AHar/Arp
BtnAsign 1, 2
AHarType 1 - 12
Arp Type 1 - 100
ArpegHld On/Off
Reverb 1 - 21
Chorus 1 - 11
Equalizr 1 - 10
Default See Page
0 EN-17
EN-17
0 EN-17
0 EN-17
0 EN-17
54 EN-14
3 EN-10
115 EN-32
127 EN-21
EN-10
4 EN-10
127 EN-10
2 EN-27
EN-33, EN-34
1 EN-33, EN-34
1 EN-33
1 EN-34
Off EN-34
11 EN-15
1 EN-15
1 EN-16
EN-43