Set Up Your Vuezone System; Connect The Base Station - NETGEAR VueZone User Manual

Set Up Your VueZone System

Your network must be connect to the Internet before you install the VueZone base station.
Follow the steps in this section in the order in which they are presented.

Connect the Base Station

The base station needs to be connected to a network with an Internet connection.

To connect the base station to your network:
Connect the Ethernet cable to the Ethernet port on the base station and a LAN port on
1
your router.
Figure 5. Connect the base station to your router and plug in the base station.
Connect the power adapter to the base station and power outlet.
2
The blue Power LED lights.
•
The blue Internet LED flashes if the base station can connect to the Internet. It might
•
take up to 2 minutes before this LED starts flashing.
For help with troubleshooting, visit
Tip:
answers and links to VueZone support.
VueZone System
http://support.netgear.com
Getting Started
9
for