Motion Detection; Schedule A Recording - NETGEAR VueZone User Manual

Motion Detection

To adjust your motion detection settings, you must first enable motion detection using the
radio buttons.

To adjust your motion detection settings:
Click the Motion Detection link.
1
Using the slider, select the sensitivity. The higher the number, the more sensitive the motion
2
detection sensor.
Select whether you want video or a snapshot captured.
3
If you selected video in Step 3, select the length of recording.
4
If you want to receive motion email alerts, click yes and enter the email addresses to which
5
you would like the alert sent.
Customize the message that you would like to receive when an alert is sent.
6
Click Save.
7

Schedule a Recording

Here, you can schedule recordings, and see schedule times, dates, speed, and the estimated
size of the recording.
Recordings must be scheduled at least 5 minutes in advance and are limited to 4 hours.
•
When cameras are scheduled to record, your system is unable to stream other cameras.
•
You can have only one scheduled recording per camera, per day. The scheduled
•
recordings cannot overlap.

To schedule a recording:
On the Settings tab, select the camera that you want to use.
1
Click Schedule a Recording.
2
Select the start and end times, how often you want the recording to happen, and the dates.
3
VueZone System
Settings Tab
32