Makita HS7601 Technical Information page 5

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Base (cont.)
DISASSEMBLING
(4) Disassemble the components of Base. See Fig. 5.
Fig. 5
1. Remove the following screws and washers from Base.
M6x16
Thumb screw
Spring
washer 6
Flat
washer 6
3. Remove Angular plate.
M5x12 Countersunk head screw (5 pcs.)
ASSEMBLING
Assemble by reversing the disassembly procedure. Refer to Figs. 5, 4, 3 and 2.
Note: Bow stop ring E-12 and Lever plate in Depth guide section have to be assembled as drawn in Fig. 6.
Fig. 6
Setting of Bow stop ring E-12
Bow stop ring E-12
Depth guide
Flat washer 8
M6x12 Thumb screw
M6x21
Thumb screw
Flat washer 6
Spring washer 6
Angular plate
M5x8 Hex socket
set screw
M5X8 Hex socket set screw (for fixing 6-7 Shoulder pin)
Right direction
Lever plate
Wrong direction
2. Remove Depth guide and Bracket.
Depth guide
Plate
M4x8 Pan
head screw
( 2 pcs.)
M4x8 Countersunk
head screw (4 pcs.)
4. Pull out 6-7 Shoulder pin, and then remove
Angular guide from Angular plate.
6-7 Shoulder pin
Assembling of Lever plate
The angle of Lever plate has to be placed
between 0° to 30°.
P 5/ 11
Bracket
Angular guide
Angular plate
30° or less