Makita HS7601 Technical Information page 3

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Base
DISASSEMBLING
(1) Set the cutting depth of the machine to the maximum and then remove Saw blade as drawn in Fig. 2.
Fig. 2
Saw blade
1. Remove M6x20 Hex socket head bolt,
and then separate Outer flange 35
and Saw blade from the machine.
(2) Disassemble Depth guide section as drawn in Fig. 3.
Fig. 3
1. Set the cutting depth to the minimum.
Turn Lever plate to loosen M8-13 Hex nut.
Remove Bow stop ring E-12 with a small
slotted screwdriver.
And then, remove M8-13 Hex nut and
Lever plate.
Lever plate
Flat washer 8
3. Remove M8x24 Flat head square neck bolt.
Fastening Depth guide with Base to Blade case complete
is released.
Note: Be careful not to lose Flat washer 8.
Outer flange 35
Depth guide section
2. Remove M6x20 Pan head screw and Rubber sleeve 6.
Safety cover moves toward a direction designated with Black arrow.
The head of M8x24 Flat head square neck bolt appears.
Bow stop ring E-12
M8-13 Hex nut
M8x24 Flat head
square neck bolt
M6x20 Hex socket
head bolt
2. Remove Inner
flange 35.
M8x24 Flat head
square neck bolt
Rubber sleeve 6
M6-20 Pan head screw
Flat washer 8
P 3/ 11
Inner flange 35
M8x24 Flat head
square neck bolt